Overview
The HornBlasters HornAir 544K Nightmare Edition Air System in black, part number H/BHA-544K, is a 150 PSI air kit with a 5 gallon tank for large applications. It is universal fit and suited to full-size train horns, air tools, tire inflation and other mobile air uses.
It can also fill leveling air springs on a truck that has air springs but no compressor setup. Horns need an air valve kit to connect the system properly.
Key features
- 150 PSI rated air system
- 5 gallon tank
- Includes 10 and 18 gauge wire
- Complete wiring kit with a fuse holder
- Standard 1/2″ OD push-to-pull fitting for connecting horns
Sizing a tank for your use
An air tank supplies pressure for whatever you connect, so the tank size and the demand of your application should match. Air tools and tire inflation draw air differently than horns or leveling air springs, so think through how often and how long you will run the system before choosing a setup.
A compressor and tank system works best when the lines, fittings and wiring are sized and secured for the job. Keep the tank mounted firmly, route lines away from heat and moving parts, and make sure any fuse sits close to the power source.
- Match tank demand to how you will use the air
- Route lines away from heat and moving parts
- Mount the tank firmly
- Keep the fuse close to the power source
Specifications
| Brand | HornBlasters |
|---|---|
| Part number | H/BHA-544K |
| Model | HornAir 544K |
| Edition | Nightmare Edition |
| Color | Black |
| Pressure rating | 150 PSI |
| Tank volume | 5 Gallon |
| Wire | 10 and 18 gauge |
| Fitting | 1/2″ OD push-to-pull |
| Fitment type | Universal fit |
Vehicle fitment
This air system is universal fit and is not built for a specific vehicle. It works with train horns, air tools, tire inflation and leveling air springs.
Check that the air system and its horn or air spring setup match your application before ordering, since fitment is not vehicle-specific.
Installation notes
The kit includes 10 and 18 gauge wire and a fuse holder, so wire the power feed with the fuse holder in line. Horns need a separate air valve kit to connect the system properly. Keep the power circuit fused and depressurize the tank before servicing.
What’s included
The kit includes 10 and 18 gauge wire, a complete wiring kit with a fuse holder, and a standard half-inch OD push-to-pull fitting.
Not included: An air valve kit, which horns need to connect the system properly.
