Overview
The Omix-Ada 19707.06 is a rectangular hood air vent gasket for the 1984–1986 Jeep CJ7 and the 1987–1995 Jeep Wrangler YJ. It sits between the upper air intake assembly and the cowl and replaces OE number 55052592.
This gasket is a factory surplus part with original fit. The upper air intake assembly it seals against is S-55035988.
Key features
- Rectangular gasket shape
- Sits between the upper air intake assembly and the cowl
- Factory surplus part with original fit
- Replaces OE number 55052592
Sealing the air intake
The gasket in this position keeps water, leaves and dust from working past the upper air intake and into the cowl area. When it hardens or flattens, the seal weakens, and small gaps can let moisture reach the intake and the vent area during rain or car washes. Because the gasket is compressed between two metal surfaces, its condition matters as much as its shape.
When replacing a gasket of this type, remove the old material completely and clean both mating surfaces so the new seal sits flat. Lay the gasket in the correct orientation before fitting the upper air intake, and avoid thick sealants unless the job clearly requires them. After installation, check for gaps around the perimeter by eye and recheck after the first few drives.
- Remove all old gasket material before fitting
- Check the cowl and intake surfaces for corrosion
- Recheck the seal after the first few drives
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 19707.06 |
| UPC | 804314293703 |
| Type | Hood air vent gasket |
| Shape | Rectangular |
| Replaces OE number | 55052592 |
| Mates with | Upper air intake assembly S-55035988 |
| Fitment listed | CJ7 1984–1986, Scrambler 1984–1985, Wrangler YJ 1987–1995 |
Vehicle fitment
It covers the 1984–1986 Jeep CJ7 (Base, Laredo and Renegade trims), the 1984–1985 Jeep Scrambler (Base, Laredo, Renegade and SR trims) and the 1987–1995 Jeep Wrangler (YJ). Confirm your model and trim before ordering.
The TJ, LJ, JK and JL Wrangler generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The gasket seats between the upper air intake assembly and the cowl, so those two mating surfaces are where it sits. Clean both surfaces before fitting the gasket.
What’s included
It is a single gasket. Not included: the upper air intake assembly, S-55035988, which the gasket sits between.









