Overview
The Go Rhino RB20 Running Boards, part ORP69441687PC, are steel running boards built from 16-gauge zinc coated steel for the 2007–2019 Toyota Tundra. Go Rhino lists them for the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The boards offer an off road look and a wide, full-length step platform for easier entry. The 16-gauge zinc coated steel is coated for corrosion resistance.
Key features
- 16-gauge zinc coated steel construction
- Coated for corrosion resistance
- Wide, full-length step platform
- Off road styling
- Direct fit listing for 2007–2019 Toyota Tundra models
Steel running board care
Steel running boards rely on their coating to resist moisture, so keeping that coating intact matters most. Wash off road salt, mud and sand regularly, and dry the boards so water does not sit in the seams. Small chips in the coating should be touched up before rust starts to spread across the steel.
The boards share their brackets with the truck’s body, so mounting hardware should be checked along with the boards themselves. Vibration on rough roads can loosen fasteners over time, and a board that shifts or rattles needs attention. Keep the step platform clear of gravel and debris, since trapped grit can wear through the coating.
- Wash road salt and mud regularly
- Touch up chips before rust spreads
- Check fasteners after rough roads
- Dry the boards after wet trips
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | ORP69441687PC |
| Model | RB20 Running Boards |
| Material | 16-gauge zinc coated steel |
| Finish | Corrosion-resistant coating (type not stated) |
| Fitment type | Direct fit |
Vehicle fitment
Go Rhino lists these boards for the 2007–2019 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The 2020 Tundra and other Toyota trucks are not covered. Match your year, model and trim to the fit list before ordering.
What’s included
Confirm the contents on arrival match your mounting plan, including any hardware and drop steps.









