Select your vehicle

N-Fab Roan Running Boards (Black) – NBD15CC-TX

N-Fab

Shop Ram 2500 Running Boards on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2015–2018 Ram 1500 and 2020–2026 Ram 2500 and 3500 in listed trims
  • N-Fab part number N/FNBD15CC-TX
  • 1.75-inch OD perimeter tube, 12-gauge steel top plate
  • Black finish; Direct Fit classification

Description

Overview

The N-Fab Roan Running Boards in Black, part number N/FNBD15CC-TX, are running boards with a fully welded steel top plate for the 2015–2018 Ram 1500 and the 2020–2026 Ram 2500 and 3500 trucks.

N-Fab built the Roan as a middle ground between a conventional running board and an armored side step. It uses a 1.75-inch OD perimeter tube supporting a 12-gauge steel top plate.

Key features

  • 1.75-inch OD perimeter tube
  • Fully welded 12-gauge steel top plate
  • Black finish
  • Styled between a running board and an armored side step
  • Direct Fit classification

Choosing a running board style

A running board’s main job is to give you a step at the door. On a lifted truck that step is high, so a board mounted closer to the rocker can make entry easier. The tradeoff is reduced ground clearance and more exposure to rocks on trails where the board is the lowest point under the cab. Think about how often you drive rough terrain before choosing a profile.

Boards with a welded steel top plate usually depend on the truck’s existing mounting points and on the strength of the brackets. Check fasteners after the first few trail runs, since vibration and impact can loosen them. Inspect welds on the top plate and perimeter tube for cracks, especially after a rock strike or a hard landing.

  • Measure ground clearance with the board installed
  • Re-check mounting hardware after the first trail runs
  • Inspect welds after rock strikes
  • Wipe the finish clean to spot surface damage early

Specifications

Brand N-Fab
Model Roan Running Boards
Part number N/FNBD15CC-TX
Perimeter tube 1.75-inch OD
Top plate 12-gauge steel, fully welded
Finish Black
Fit type Direct Fit

Vehicle fitment

The manufacturer fitment list includes the 2015–2018 Ram 1500 in the Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, Special Service, Sport and Tradesman trims. It also includes the 2020–2026 Ram 2500 in the Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Power Wagon and Tradesman trims, and the 2020–2026 Ram 3500 in the Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star and Tradesman trims.

The list does not cover the 2019–2026 Ram 1500, the 2011–2019 Ram 2500 or 3500, or Ram 1500 models before 2015. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

SKU: N/FNBD15CC-TX Categories: ,

Fitment

VehicleYearsTrims
Ram 15002015–2018Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, Special Service, Sport, Tradesman
Ram 25002020–2026Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Power Wagon, Tradesman
Ram 35002020–2026Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the N-Fab Roan fit a 2016 Ram 1500?

Yes. The manufacturer fitment list covers 2015–2018 Ram 1500 trucks in the Big Horn, Express, Laramie, Limited, Rebel, SLT and other listed trims. Confirm your vehicle's year, model and trim before fitting.

Does the Roan fit a 2019 Ram 1500?

No, not on this list. The fitment for part number N/FNBD15CC-TX covers 2015–2018 Ram 1500 models and 2020–2026 Ram 2500 and 3500 models. Check your model year before fitting.

What makes the Roan different from a regular running board?

It sits between a conventional running board and an armored side step. It has a 1.75-inch OD perimeter tube and a fully welded 12-gauge steel top plate.

Do side steps affect ground clearance?

Yes. A board mounted low on the rocker reduces ground clearance at the sill. Check its lowest point against your approach and departure angles before off-road trips, and plan routes with that in mind.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 2500 Running Boards on Amazon