Overview
The Go Rhino BR5 front replacement bumper 24295T is built for the 2015–2017 Ford F-150. It is a textured black powder coat bumper that carries the look of the BR10 over to half-ton trucks.
The welded one-piece winch tray is 1/4″ thick steel and takes winches up to 12,500 lbs, with a 1 inch thick D-shackle clevis welded directly to it. The bumper bolts on without drilling.
Key features
- Welded one-piece winch tray in 1/4″ thick steel
- Accepts winches up to 12,500 lbs
- 1 inch thick steel D-shackle mounting clevis welded to the tray
- Optional Front Light Plate for Rigid D-Series Dually or compatible LED lights
- Installs without drilling
- Textured black powder coat
Winch tray and load planning
A winch tray does more than hold a winch. It carries the pulling load, so the tray, its welds and the clevis should be inspected after every heavy recovery. Look for cracks at the weld seams, bent tabs and loose fasteners. Any winch fitted to the tray should be matched to the vehicle’s front axle and cooling capacity, since heavy pulls add heat and load to the front end.
Shackles are a separate purchase and should be rated above the winch line load they will handle. Use the clevis as the attachment point rather than wrapping lines around the bumper structure, and keep the rope or cable away from the bumper’s edges where it can be cut. Replace worn synthetic line early, since abrasion often starts where it runs over the same edge repeatedly.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 24295T |
| UPC | 887753105479 |
| Product type | Front replacement bumper with winch tray |
| Position | Front |
| Finish | Textured black powder coat |
| Winch tray | One-piece, welded, 1/4 inch thick steel |
| Maximum winch capacity | 12,500 lbs |
| Shackle mount | 1 inch thick steel D-shackle clevis, welded to the winch tray |
| Installation | No drilling required |
Vehicle fitment
The 24295T fits the 2015–2017 Ford F-150.
Ford F-150 model years before 2015 and after 2017 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is required. Rigid D-Series Dually or compatible LED lights need the optional Front Light Plate accessory.
What’s included
- BR5 front replacement bumper
- Welded one-piece winch tray
- D-shackle mounting clevis
Not included: Shackles, winch, Front Light Plate accessory and lights.









