Overview
The Go Rhino 4000 Series side step, part number ORP4237B, is a direct fit black powdercoat step for the 2020 GMC Canyon Base.
It has non-slip step pads for easier, safer entry and exit, a smooth 90 degree bend for a clean look, and a design customized for each application. The warranty runs 5 years.
Key features
- Bolt-on, no-drill installation
- Non-slip step pads
- Smooth 90 degree bend
- Custom designed for each application
- Brackets included
Choosing a side step
A side step gives a raised point for climbing into a truck cab, and it matters most on lifted or tall vehicles where the floor sits well above the ground. Because the step bolts to the frame or rocker area, the brackets and mounting points carry the load every time someone steps on it. Before buying, measure your ground clearance and think about how often passengers will use the step.
Bolt-on steps are often chosen over welded ones when owners want to remove them for trail work or swap them later. Check how the step sits relative to the door sill so your foot lands on the pad rather than the edge, and confirm the mounting points line up with the frame before committing.
After installation, inspect the fasteners after the first few drives and again periodically. Look for loose bolts, bent brackets, worn pads, and rust at the mounts. Early surface wear is a good sign to tighten or replace hardware before a bigger problem develops.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | ORP4237B |
| Series | 4000 Series |
| Finish | Black powdercoat |
| Bend | Smooth 90 degree |
| Included | Brackets |
| Fitment type | Direct fit |
| Warranty | 5 years |
Vehicle fitment
It fits the 2020 GMC Canyon in the Base trim.
Canyon model years other than 2020 and other trims are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the bracket mounting points against your truck before installing.
What’s included
Brackets are included.









