Overview
The ARB 4×4 Accessories Fuse, part number 10910034, is an electrical fuse for DC circuits. Check the markings on the fuse it replaces for the amp rating, voltage and the circuit it protects.
Choosing a replacement fuse
A fuse is a deliberate weak point that protects the wiring it serves. Its rating is matched to the circuit’s wire gauge and the load it powers, so the replacement should carry the same amp rating and physical size as the original. Upsizing a fuse to stop it blowing removes that protection and can overheat wiring before the fuse opens.
If a fuse blows repeatedly, the cause is usually a fault in the load or the wiring, not the fuse. Check for pinched wires, moisture at connectors or a device drawing more current than expected before replacing again. Keep a few spares of the correct rating in a dry, labeled spot so a blown fuse can be swapped quickly on the trail.
- Match the amp rating and size exactly
- Inspect the fuse holder for corrosion
- Investigate any fuse that blows repeatedly
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 10910034 |
| UPC | 70000682578 |
| Current type | DC |
Vehicle fitment
It is a universal fit fuse, so it is not assigned to a specific vehicle year, make or model. Match the rating and physical size of the fuse you are replacing before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the amp rating of the fuse being replaced, because a higher-rated fuse can let a circuit overheat. Turn off the circuit before swapping a fuse.
What’s included
The item is a single fuse.
Not included: Check whether your circuit needs a fuse holder or wiring before starting, and confirm both against your installation.









