Overview
This is a 20×10 aluminum wheel in Black Machined, part number MHTD53720009850. It carries 6 on 135 and 6 on 5.5 bolt patterns and is universal fit, so it is not tied to one vehicle.
Black Machined is the finish name for this wheel. The 20-inch diameter and 10-inch width set the size. Offset and backspacing are unknown, so measure them before mounting.
Key features
- Maverick style with a Black Machined finish
- Aluminum construction
- 20-inch diameter and 10-inch width
- Two bolt patterns named: 6 on 5.5 and 6 on 135
- Universal fit as the only fitment stated
Caring for a machined finish
A machined face with a clear coat shows its best look when the surface is kept clean and free of grit. Brake dust and road film can build up in the machined grooves, so a soft brush and mild cleaner work better than hard pads. Avoid strong solvents, which can soften the coating over time and leave dull patches around the lug area.
Inspect the wheel after rough outings. Look at the lip, the bead seat and the spokes for bends or deep scratches, since these affect air retention and balance. Check that the tire suits the rim width, and re-check lug nut torque after the first few drives. Store spare wheels upright on a clean surface, away from moisture.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD53720009850 |
| Model | Maverick |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt patterns | 6 on 5.5 and 6 on 135 |
| Finish | Black Machined |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the only fitment stated, with no year, make or model. Pick the bolt pattern and diameter that match your hub.
Vehicle fit is open, so verify your own year, model and trim before buying.
What’s included
The title describes one wheel.
Not included: Decide whether you need tires, lug nuts or center caps for this setup before you order.









