Overview
The Lethal is a 20 inch by 10 inch black milled split spoke wheel, part number MHTD56720001745. It is built for an 8 on 170 bolt pattern with a 125 center bore. The wheel is a universal-fit design and is not tied to a particular make, model or year.
The -24 offset and 4.5 backspacing place this wheel further out than the standard range, so fender and brake clearance should be verified on the vehicle before the wheel is used on the road.
Key features
- 20 inch diameter and 10 inch width
- Split spoke design
- Black milled finish on aluminum
- 8 on 170 bolt pattern
- Offset -24 and center bore 125
Eight-lug truck fitment
Eight-lug hubs carry heavier loads than most six-lug and five-lug setups, which is why bolt pattern accuracy matters so much. Each stud shares load across the wheel, so a worn or bent stud can cause uneven clamping. Inspect studs and lug seats before mounting, and replace damaged studs rather than forcing a fit.
Large-diameter wheels on heavy trucks often pair with wide tires that need more room in the wheel well. A tire that rubs at full lock can wear the sidewall, and the contact can break down the bead seal over time. Keep the wheel and tire balanced, rotate on schedule, and recheck clearance after any suspension work.
- Stud condition checked before mounting
- Lug seat style matched to the nuts
- Clearance rechecked after suspension changes
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD56720001745 |
| Model | Lethal |
| Style | Split Spoke |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 170 |
| Offset | -24 |
| Center bore | 125 |
| Backspacing | 4.5 |
| Finish | Black milled |
| Construction | Aluminum |
| Fit category | Universal |
Vehicle fitment
No make, model or year is named for this wheel. Confirm that your hub is an 8 on 170 pattern with a 125 center bore, and check the -24 offset against your vehicle’s clearances.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the 8 on 170 pattern and 125 center bore before mounting, since an incorrect hub match can prevent the wheel from seating. Check that the wheel clears the brake assembly once the tire is installed.
What’s included
Before mounting, decide whether tires, lug hardware and center caps come from another source, and check that each part fits the 8 on 170 pattern.









