Overview
The FUEL Off-Road Blitz D693 in 20×10, part number MHTD69320007547, is an aluminum split spoke wheel in platinum with a 5 on 5 bolt pattern. It is offered for trucks and SUVs that use that pattern.
A negative offset of -18 moves the mounting face outward, and the 4.8 backspacing sets the inner clearance. Both figures should be checked against your vehicle before fitting.
Key features
- Split spoke style
- Platinum finish
- Aluminum construction
- 20-inch diameter and 10-inch width
- 5 on 5 bolt pattern with center bore of 72
Offset and clearance checks
Offset sets where the mounting face sits relative to the centerline of the wheel. A negative offset moves the face outward, which can bring the wheel closer to the fender lip and to suspension parts on the outside. Backspacing shows how much room remains behind the mounting face for brake calipers, brake lines and any inner suspension components.
Platinum finishes and split spoke styling both benefit from a gentle wash and a soft cloth. Abrasive pads and harsh chemicals can dull the surface, so routine care keeps the finish looking consistent over time. Inspect the wheel after any impact for cracks, flat spots or bent lips.
Center bore fit is a separate check from bolt pattern fit. A hub larger than the wheel’s bore will not seat, so the bore must clear the hub. When the bore is larger than the hub, hub-centric rings can center the wheel.
- Confirm bolt pattern and center bore together
- Check brake caliper clearance through the spokes
- Clean the finish with a soft cloth
- Inspect the lips after any curb strike
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD69320007547 |
| Model | Blitz D693 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5 |
| Offset | -18 |
| Center bore | 72 |
| Backspacing | 4.8 |
| Style | Split spoke |
| Finish | Platinum |
| Construction | Aluminum |
Vehicle fitment
No specific vehicle is matched to this wheel, which is a Universal Fit design. Match the 5 on 5 bolt pattern and center bore of 72 to your hub before choosing it for a particular vehicle.
Vehicles with a different bolt pattern or hub bore will not match these specifications, even when the wheel diameter is the same. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A negative offset of -18 moves the mounting face outward, so check clearance at the brake calipers and fender before fitting.
What’s included
The wheel is supplied alone.
Not included: Tires, lug nuts and center caps are not included, so buy them separately if needed.











