Overview
The Fox Racing Shox 2.0 Performance Series Smooth Body Reservoir Shock, part number 985-24-107, is a bolt-on shock with a 20.80 in. extended length, 13.20 in. collapsed length and 7.60 in. stroke. Its smooth body is offered as a direct-fit unit.
The metal-impacted aluminum body is designed to shed heat more quickly than steel. Inside, an Internal Floating Piston separates the shock oil from high-pressure nitrogen gas, which supports a predictable ride on rough roads.
Key features
- Metal-impacted aluminum shock body that Fox says sheds heat faster than steel
- Internal Floating Piston separates shock oil from nitrogen gas
- Extended length 20.80 in. and collapsed length 13.20 in.
- Stroke of 7.60 in.
- Direct fit bolt-on package
Choosing a reservoir shock
A reservoir shock keeps its oil and gas in a separate chamber, which leaves room for the damping to work through long compressions. On trails with repeated hard hits, that separation helps the shock hold a steady feel over a full day. On pavement the same setup tends to feel composed rather than harsh, because the gas charge does much of the work in controlling body motion.
Before buying, measure the shock you are removing from mounting eye to mounting eye, both compressed and extended. Compare those figures with the new unit, and consider stroke as well, since a shock with the right length but too little travel can top out or bottom out early. Look at the mounting hardware and bushing sizes at the same time so nothing has to be improvised during installation.
Reservoir shocks are often replaced together with worn bushings and bump stops, because worn mounts change how the shock loads. Watch for oil on the body, knocking sounds over rough ground, or a ride that wallows after a few hard landings.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-107 |
| UPC | 700007190335 |
| Product series | 2.0 Performance Series Smooth Body Reservoir |
| Extended length | 20.80 in. |
| Collapsed length | 13.20 in. |
| Stroke | 7.60 in. |
| Body | Metal-impacted aluminum |
| Piston design | Internal Floating Piston (IFP) |
| Mounting | Direct fit |
Vehicle fitment
Fit is not confirmed for a specific year, model or trim. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the extended and collapsed lengths with your existing shock.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current shock’s extended and collapsed lengths against 20.80 in. and 13.20 in. before ordering.
What’s included
Check the package contents against your installation before starting, since included hardware and bushings are not known.







