Overview
The Fox Racing Shox 2.0 Series Emulsion Shock, part number 985-24-002, is a gas charged shock in the Fox 2.0 Shock Series. Fox labels it universal fit and names no specific vehicle, so the shock has to be matched to your vehicle by its dimensions and mounting style.
Fox offers its shock range in a broad range of sizes, valved for specific driving needs, with several mounting options. Length, stroke and mounting layout for this emulsion version should be compared against your current shock before ordering.
Key features
- Gas charged design
- Fox 2.0 Shock Series
- Emulsion shock style
- Universal fit label from the manufacturer
- Valving can be tuned to suit different driving needs.
Measuring before you buy
Measuring is the most reliable way to match a shock to a vehicle. Start with the collapsed length, the extended length and the distance between the eye and stud centers on the existing unit, then work out stroke by subtracting collapsed from extended. Bushing diameter and stud thread also matter, because a shock of the right length can still fail to bolt in when the mounts differ. Take the readings with the suspension at the ride height you normally drive.
Emulsion shocks mix gas and oil in one tube, so the gas charge stays pressurized and the body must stay sealed. Shocks that leak or feel weak are often replaced in pairs on the same axle so damping stays even from side to side. Keep the removed unit for comparison and photograph the mounting points before disassembling anything.
- Collapsed and extended length
- Eye and stud center spacing
- Bushing and stud thread size
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-002 |
| UPC | 70000617852 |
| Shock series | 2.0 Shock Series |
| Shock style | Emulsion |
| Charge | Gas charged |
| Fitment | Universal fit (manufacturer label) |
Vehicle fitment
No vehicles are tied to this shock. It is a universal fit design, so it is not matched to a particular vehicle.
A universal label does not confirm that a shock’s length and mounting match your suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing shock collapsed and extended, and note its mounting eye and stud spacing, before ordering. Gas charged shocks are pressurized, so do not open, cut or heat the body.
What’s included
One emulsion shock under part number 985-24-002.
Not included: Plan for mounting hardware and confirm which parts your installation needs before starting.








