Overview
The Flowmaster Outlaw exhaust system, part number FLW817633, is a bolt-on stainless steel exhaust for 2009-2020 RAM 1500 Classic body trucks with the 5.7L Hemi and factory dual tailpipes. It is designed for a deep, aggressive sound level inside and outside the truck, with the performance benefits Flowmaster is known for.
Flowmaster’s Lifetime Limited Warranty covers the system. The outlet pipes are dual 2.50-inch pipes that connect to the factory dual tailpipes, and the system uses the factory hanger locations.
Key features
- 3.00-inch mandrel-bent inlet tube
- Specially designed Outlaw muffler
- Dual 2.50-inch outlet pipes that connect to factory dual tailpipes
- Uses the factory hanger locations for mounting
- Bolt-on stainless steel construction
Tuning the sound and fit
A dual exhaust changes how the truck sounds more than how it runs, and the sound depends on the muffler design, the pipe routing and how quiet the cabin is. A Classic body RAM with the 5.7L Hemi already has a deep note at idle, so the sound at cruise is usually where owners notice the difference most. Stainless steel holds up better than mild steel in road salt areas, which matters for welds and clamps over time, and it keeps the finish cleaner between washes.
Before buying, check that the factory dual tailpipes are in good shape, because the new outlet pipes connect to them. Rusted tailpipe ends can crack under a clamp and leak. Plan on replacing the hanger rubbers and clamps at the same time, since worn ones often cause rattles after installation. Oxygen sensor placement and heat shields should be inspected while the exhaust is off the truck, so nothing is pinched or rubbing during the first drive.
- Inspect the factory tailpipes for rust before fitting
- Replace worn hanger rubbers and clamps during installation
- Check welds and joints for leaks after the first drive
- Keep the stock exhaust if you may return to the factory setup
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW817633 |
| Material | Stainless steel |
| Inlet tube | 3.00-inch mandrel-bent |
| Outlet pipes | Dual 2.50-inch mandrel-bent |
| Muffler | Outlaw muffler |
| Mounting | Factory hanger locations |
| Engine | 5.7L Hemi |
Vehicle fitment
It fits 2009-2020 RAM 1500 Classic body trucks with the 5.7L Hemi and factory dual tailpipes. Confirm fit for your truck’s year, body style and engine before ordering.
This exhaust is built for the Classic body with the 5.7L Hemi and factory dual tailpipes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system bolts on using the factory hanger locations and connects to the factory dual tailpipes. Let the exhaust cool fully before working under the truck, and support it safely.
What’s included
The kit includes the Outlaw muffler, the 3.00-inch inlet tube, the dual 2.50-inch outlet pipes, hardware and installation instructions.













