Overview
The Factor 55 Flatlink XXL Shackle Mount, part number 00090-06, is a folding shackle mount for recovery winches. It takes the place of the conventional winch hook and uses a FlatLink shackle thimble and D-ring in its place.
The mount suits owners who run recovery winches with a roller fairlead or license plate mounting bracket. A conventional hook can cut and fray recovery straps and let strap ends escape during slack, while a screw pin keeps the strap loop secured. It is not tied to a particular vehicle make, model or year.
Key features
- Replaces the winch hook with a folding FlatLink shackle thimble and D-ring
- Less than 1.75 inches of thickness, so it works with roller fairlead license plate mounting brackets
- No splicing required; accepts steel cable or synthetic rope up to 3/8 inch diameter
- 5/8 inch diameter grade 5 steel double shear pin with internal snap ring
- EPDM rubber guards with four barbed tips protect alloy fairleads
- Stows against roller or Hawse type fairleads and is designed for common 3/4 inch shackles
- Made in the USA from 6000 series billet aluminum, anodized and powder coated in five colors
Choosing a recovery connection
A recovery connection is only as strong as its weakest part. Shackles, D-rings, hooks and pins each have a rated load, and the lowest rating in the chain limits the pull. Match the mount, pin and shackle to the winch line and the vehicle’s recovery points rather than assuming any part will handle the full winch rating.
Straps and ropes wear at the points where they bend or rub. Sharp edges on a hook can cut the line, and a bent or worn pin can allow the eye to slip. Keep the rope path clear of sharp corners, and use a sleeve or wrap where the line passes over rough metal. Stay out of the bight during a pull.
Routine care keeps the connection reliable. Clean grit from the pin and snap ring, check for corrosion on the aluminum body, and replace any worn rubber guard. After a hard pull, inspect the whole chain before reusing it. A cracked body, a loose pin or a flattened D-ring means the part should be retired.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00090-06 |
| UPC | 70000778857 |
| Material | 6000 series billet aluminum |
| Finish | Anodized and powder coated, available in 5 colors |
| Rope or cable diameter | Up to 3/8 inch |
| Pin | 5/8 inch diameter grade 5 steel double shear pin with internal snap ring |
| Guards | EPDM rubber with 4 barbed tips |
| Thickness | Less than 1.75 inches |
| Shackle size | Designed for common 3/4 inch shackles |
| Rating | 15000 (unit not stated) |
| Origin | Made in USA |
Vehicle fitment
It is not tied to a specific make, model or year. The fairlead type on your vehicle matters more than the model, because the mount is designed for roller fairlead and license plate mounting brackets.
Confirm fit for your vehicle’s year, model and trim before ordering. Measure the fairlead and mounting bracket to confirm the fit.
Installation notes
The mount installs in minutes and needs no splicing of the rope or cable. Because it carries a winch load during recovery, inspect the pin, snap ring and shackle before each pull.
What’s included
The FlatLink shackle mount with its 5/8 inch steel double shear pin, internal snap ring and EPDM rubber guards.
Not included: the 3/4 inch shackle and the winch line, which the mount is designed to work with.












