Overview
The Rugged Ridge 11235.12 is a snatch block pulley for ATV and UTV owners. It doubles the capacity of a winch or changes the angle of a pull, and it is suitable for use up to 8,000lbs with winch cables up to 1/4 in diameter.
Use it to reduce strain on the winch motor and electrical system when recovering a machine, or where a straight pull is not practical. The pulley is not recommended for full size vehicles.
Key features
- Rated for use up to 8,000 lbs
- Changes the pulling angle in recovery work
- Doubles winch pulling capacity when rigged that way
- Can reduce strain on the winch motor and electrical system
- Winch cables up to 1/4 in diameter
- Aimed at ATV and UTV use; not recommended for full size vehicles
ATV and UTV recovery basics
Recovering a small machine often means working from a tree or a stout anchor at an odd angle. A snatch block lets the line run where the machine sits rather than in a straight line from the winch. Use tree protection under straps, keep the rigging short and watch the line as it tightens, since a smaller vehicle can shift quickly when the load comes on.
Check the cable after each use for kinks, fraying and flat spots, and replace it if damage shows. Inspect the pulley for wear in the groove and loose hardware on the hanger. Keep the winch rating and the pulley rating in mind together so the lighter rigging never gets the heavier load.
- Use tree protection under straps
- Keep rigging short and watch the line
- Inspect cable for kinks and fraying
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.12 |
| UPC | 804314228347 |
| Rating | Up to 8,000 lbs |
| Maximum winch cable | 1/4 in diameter |
| Intended use | ATV and UTV |
| Fitment | Universal fit |
Vehicle fitment
This pulley is universal fit and aimed at ATV and UTV owners. It is meant for smaller machines and is not a fit for full size vehicles.
Confirm your ATV or UTV winch rating falls within the 8,000lbs limit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check that your ATV or UTV winch falls within the 8,000 lbs limit before rigging, and confirm the cable diameter matches the 1/4 in capacity.












