Overview
The Fabtech FTS98008 Spanner Wrench is a shock absorber wrench for coil-over shock adjustments. It is designed to make those adjustments simpler and to help protect shock spanners from damage. It is universal fit, so it is not tied to a particular year, make or model.
Keeping a dedicated spanner wrench on hand is a practical way to handle routine coil-over tuning on an off-road build. Because the tool is a hand tool, check that its design suits your own shock adjuster before you start.
Key features
- Made for coil-over shock adjustments
- Designed to avoid damaging shock spanners
- Universal fit, not tied to a particular vehicle
Coil-over adjustment basics
A coil-over shock uses a threaded spring seat that sets preload, and the adjuster is usually turned with a spanner. Changing preload alters ride height and how the suspension responds to load, so small steps are easier to judge than large ones.
Work on one corner at a time and note the starting position before turning anything. Turn the adjuster in short increments, then road test the change. Keeping the spanner square to the adjuster prevents rounded edges and reduces the chance of damaging the shock body.
Coil-overs that are adjusted often can collect dirt in the threads, so wipe the adjuster clean before each use. Worn threads or a loose spring seat should be inspected before the vehicle is driven hard.
- Adjust in small, equal steps
- Record the starting position
- Clean the adjuster before turning
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS98008 |
| UPC | 674866018471 |
| Tool type | Spanner wrench for coil-over shock adjustment |
Vehicle fitment
The FTS98008 is universal fit, so it is not vehicle-specific.
Confirm your vehicle’s year, model and trim before ordering.








