Overview
The Fabtech FTS89905 is a 4 in. spanner wrench for shock absorber hardware, part number FTS89905. It is universal fit and is not tied to a particular vehicle model or year.
Use the Fabtech FTS89905 as a reference for part number and size when you need a 4 inch spanner wrench for shock absorber hardware.
Key features
- Spanner wrench tool type
- 4 in. size listed
- Universal fit, not vehicle-specific
- Fabtech part number FTS89905
Using a shock spanner wrench
A spanner wrench works by engaging the notches or pins on a shock body or lock ring, so it turns the fitting without slipping. Before each use, look at the hook or pin end for bends, rounded edges or wear, since a worn tip can slip and scratch the shock finish.
Good technique matters more than force. Seat the tool fully before turning, keep it square to the fitting, and make short, controlled movements. Clean grit and old grease off both the tool and the shock so the engagement stays firm.
Shock hardware is often tight after long trail use, so expect to need a steady pull rather than a sudden jerk. If a fitting will not move, stop and check for corrosion or the wrong tool size instead of switching to a larger tool.
- Inspect the tip for wear before each job
- Keep the tool clean and dry in storage
- Mark the original position of any adjuster
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS89905 |
| UPC | 674866018891 |
| Tool type | Spanner wrench |
| Size | 4 in. |
Vehicle fitment
It is universal fit, so it is not tied to a model year or chassis. Match the 4 in. size to your shock hardware before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Included items are not confirmed here. Verify the contents against your job before you start.








