Overview
The Prothane 19-903-BL is a black hourglass shock mount bushing. It is identified by part number 19-903-BL and UPC 636169020032, and its listed dimensions are a 1.010 in outside diameter, a .625 in bolt hole and a .990 in width.
Measuring before you install
A shock mount bushing sits between the shock eye and the mounting bracket, absorbing vibration and small movements so the shock does not transmit noise into the chassis. Polyurethane bushings are firmer than rubber, which keeps the shock more controlled but can carry more road noise. The hourglass shape helps the bushing seat in the mount and hold its position under load.
Before buying a replacement, measure the bushing bore, the bolt hole and the sleeve or washer thickness on the existing part. Check the shock eye and bracket for cracks or elongated holes, since a worn mount can keep a new bushing from sitting correctly. Install the new bushing with the correct sleeve and hardware, and tighten the fasteners once the vehicle is at normal ride height.
- Measure bore, bolt hole and width first
- Inspect the mounting bracket for cracks
- Replace bushings in pairs on the same axle
- Check for squeaks after the first drive
Specifications
| Brand | Prothane |
|---|---|
| Part number | 19-903-BL |
| UPC | 636169020032 |
| Type | Shock mount bushing |
| Color | Black |
| Shape | Hourglass |
| Outside diameter | 1.010 in |
| Bolt hole diameter | .625 in |
| Width | .990 in |
Vehicle fitment
Prothane marks this bushing universal fit, so it names no year, make or model. Measure your shock mount’s bolt hole and bushing bore against these figures before installing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the shock mount bushing is described.









