Overview
The Fabtech FTS7191 is a front Performance Twin Tube Shock Absorber for Chevrolet Silverado and GMC Sierra trucks from 2001 to 2008, along with the Avalanche, Suburban, Yukon XL and Hummer H2 entries. It is a hydraulic twin tube unit with a 2.38 inch body, a 9/16 inch chrome hardened piston rod and 9-stage valving, set for a 6 inch lift.
The Performance line is built to work with Fabtech suspension systems for ride control. Its high velocity 9-stage valving and closed cell foam insert keep damping consistent and limit fade at speed. Compare the collapsed, extended and travel lengths below with the shock you are replacing.
Key features
- Hydraulic twin tube body measuring 2.38 inch in diameter
- High flow 9-stage valving for controlled damping
- Closed cell foam insert inside the shock body
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Powdercoated white with blue Fabtech logo printing
- Set up for a 6 inch lift
Lifted trucks and shock length
A lift changes the length a front shock must cover, so the lift setting of a shock should match the height of the suspension it is installed on. Shocks with too little travel can bottom out over bumps, while a shock with too much length can put stress on its mounts when the wheels reach full droop. Comparing the collapsed, extended and travel measurements with the old shock is a practical first step.
Front shocks on pickups with larger tires often work harder, and wear shows up as bounce, nose dive under braking or uneven tire wear. Before fitting, look at the mount eyes, bushings and bump stops, and check that the new shock moves freely without rubbing. Pickups in this class usually benefit from replacing shocks in matched pairs.
- Compare lengths with the old shock
- Check mount ends and bushings
- Inspect bump stops before installing
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7191 |
| UPC | 674866007802 |
| Shock series | Performance Shock |
| Position | Front |
| Shock body | 2.38 inch diameter, twin tube |
| Type | Hydraulic |
| Reservoir | No |
| Collapsed length | 21.69 in. |
| Extended length | 13.16 in. |
| Travel length | 8.53 in. |
| Lower mount | S38 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Finish | White powdercoat with blue Fabtech logo |
| Lift setting | 6 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers Chevrolet Avalanche 2500 (2002–2006), Silverado and Suburban models, GMC Sierra and Yukon XL models, and the 2003–2008 Hummer H2 (Base). Entries span 1500 HD, 2500, 2500 HD, 3500 and 3500 HD trucks in model years 2001 through 2008, with trim lists by year, so check your exact trim against the list.
Ford Super Duty trucks and Silverado or Sierra models from later model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount codes S38 (lower) and EB1 (upper) are listed, so match them to the mount ends on the shock you are removing. The lift setting is 6 inch, so a truck with a different lift height should be checked against the collapsed and extended lengths above before fitting.
What’s included
One Performance Twin Tube Shock Absorber, powdercoated white.
Not included: Check what brackets, bushings or fasteners your mounts need before installing.




















