Overview
The Fabtech Dirt Logic 2.5 coil over shock absorber, part number FTS26052, is a front, gas charged coilover with a remote reservoir for a 4 in. lift. It is a direct fit unit.
Before you buy
Coil over shocks replace the stock front shock and spring as one assembly, so the unit you choose affects ride height, damping and how the front end handles on the trail. A gas charged body helps the damper resist fade when it works hard over repeated bumps. A remote reservoir adds oil capacity and gives the damper room to shed heat, and the reservoir hose needs a clear, protected route so it stays away from tires and moving parts.
Before buying, compare the assembly length with your current front suspension, including the mounting points and tire clearance at full compression. A lift changes geometry, so plan for an alignment and for a check of brake lines and steering linkage after installation. Front control arm bushings and sway bar links wear alongside the shock, so inspect them at the same time.
- Measure clearance for the reservoir hose and its mount
- Check bump stops when the spring rate changes
- Inspect the shock body for leaks after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26052 |
| UPC | 674866099708 |
| Product type | Coil over shock absorber |
| Series | Dirt Logic 2.5 Coilover |
| Lift height | 4 in. |
| Position | Front |
| Reservoir | w/Resi |
| Design | Gas charged |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil-over shocks carry the vehicle’s weight through the spring, so compress and release the spring only with the proper tools and follow the Fabtech instructions closely. Set the spring preload evenly side to side, then confirm ride height before tightening the mounts. An alignment after installation is a good idea.








