Overview
The Fab Fours DR13-F2950-B is a bare steel winch front bumper for 2013 to 2018 Ram 1500 trucks, listed with a full grill guard and sensor compatibility and with a built-in winch mount.
Fab Fours calls its Premium winch bumper a design that focuses on strength and durability and that gives more tire clearance, so a larger tire is less likely to rub. This version is supplied uncoated and paintable, with a winch mount that takes winches up to 12,000 lb.
Key features
- Winch bumper with the winch mount included
- Accommodates winches up to 12,000 lb
- Full grill guard, listed with sensors
- Bare steel, uncoated and paintable
- Extra tire clearance to reduce rubbing
- Full-width steel front bumper, direct fit
Winch bumper setup
A winch on a front bumper pulls hard, so the mount and the bumper share the load. Use a winch rated for the mount and keep that limit in mind when choosing cable length and hooks. Fairleads, snatch blocks and rigging should match the expected load so the winch is not stressed beyond its design.
Recovery technique matters as much as the hardware. Use a damper on the cable, keep people clear of the line, and pull straight when possible to reduce side loading on the bumper. After each recovery, look over the winch mount bolts, the welds and the cable for kinks or fraying. Replace damaged hooks or cable before the next pull, not after it fails.
- Match rigging to the winch’s rated load
- Use a cable damper on every pull
- Inspect mount bolts after each recovery
- Replace frayed cable and worn hooks
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR13-F2950-B |
| UPC | 5810109097 |
| Type | Winch front bumper with full grill guard |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Bare, uncoated and paintable |
| Fit type | Direct fit |
| Winch mount | Included (up to 12,000 lb winches) |
| Light mounts | Not included |
| D-ring mounts | Not included |
Vehicle fitment
Fab Fours lists DR13-F2950-B for the 2013 to 2018 Ram 1500.
Earlier Ram 1500 years and the Ram 2500 and 3500 are outside this bumper’s fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mount is already part of the bumper, so a winch rated for 12,000 lb or less can be fitted to it. The bare steel will need paint or a coating.
What’s included
- Winch front bumper in bare steel, with winch mount
Not included: The winch, paint or coating, light mounts and D-ring mounts.









