Overview
The Fab Fours rear bumper with tire carrier, part number TT-Y1351T-1, is a two-stage black powder coated rear bumper that carries a spare tire on a swing-out carrier. It fits 2005–2015 Toyota Tacoma (Base, Pre Runner, TRD Pro, X-Runner) and handles tires up to 40 inches.
The bumper and carrier combination is built for strength and durability and protects the rear end of the truck. The carrier adjusts for different wheel heights and wheel offsets and accommodates four bolt patterns. Its pivot is secured in double sheer, an in-house over center latch holds it closed, and an injection molded landing pad spreads the tire’s weight evenly.
Key features
- Adjustable for different wheel heights and wheel offsets
- Accommodates four different bolt patterns
- Pivot secured in double sheer
- In-house over center latch
- Injection molded landing pad for even weight distribution
- Locking pin next to the swivel for easy access to the rear compartment
- CB antenna mount
- Made in the USA
Installing a full rear bumper
A full rear bumper with a carrier replaces the factory bumper, so it is a bigger job than a bolt-on rack. Plan for help with lifting, a clear workspace and a way to support the assembly while you set the bolts. Check that the latch, pivot and landing pad line up before final tightening, since small misalignment becomes noticeable under a loaded tire.
Because the bumper carries a spare on a swing arm, test the swing through a full cycle with the tire loaded. Confirm the locking pin seats, then recheck the fasteners after the first rough drives. Tacoma frames and rear bumpers vary in fit detail, so keep the packaging until the install is verified.
- Support the assembly while setting the bolts
- Test the swing with the tire loaded
- Recheck fasteners after the first rough drives
- Check the latch and locking pin for smooth action
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT-Y1351T-1 |
| UPC | 5810104603 |
| Finish | 2 stage black powder coat |
| Alternate finishes | 2 stage matte black powder coat or bare steel, indicated by the -B suffix in place of -1 |
| Tubing | 1-3/4 in OD |
| Tire capacity | Up to a 40-inch tire |
| Bolt patterns | Four |
Vehicle fitment
It fits 2005–2015 Toyota Tacoma (Base, Pre Runner, TRD Pro, X-Runner).
Other Tacoma generations and other truck models are not covered. Confirm your year, model and trim before ordering.
Installation notes
This is a full rear bumper with a tire carrier, so it is a heavier job than a single bolt-on part. A loaded carrier is heavy, so use a helper when lifting the bumper into position. The locking pin and over center latch should be tested for smooth action once the unit is in place.
What’s included
The rear bumper with tire carrier includes the swivel, latch and landing pad.
Not included: A spare tire and wheel are not part of this product. The CB antenna mount is part of the bumper, and the antenna itself is a separate item.














