Overview
The Fab Fours DR13-K2961-1 is a Black Steel replacement front bumper in black powder coat for 2012 to 2018 Ram 1500 trucks, built from 14 gauge steel with tow hooks and room for factory fog lights.
This is the plain version of the Black Steel ranch-style bumper for the Ram 1500, without the full guard that DR13-K2960-1 carries. Fab Fours shaped it to the body lines of the truck, with tapered edges and no vertical flanges, and offers a bolt-on winch mount for 12,000 lb winches.
Key features
- Black powder coat
- 14 gauge steel construction
- Tow hooks included
- Accepts the factory fog lights
- Optional bolt-on winch mount, 12,000 lb winches
- Optional bolt-on D-ring mounts
- Optional bolt-on 2-inch receiver
Choosing optional add-ons
Optional bolt-on parts let the bumper be set up to suit the way the truck is used. A winch mount adds recovery capability and carries heavy loads, so its bolts and the frame behind it need regular inspection. D-ring mounts give separate recovery points and are often used with a tow strap or shackle rated for the load.
Decide on add-ons before ordering the bumper, because some mounts are easier to fit at installation than later. Consider the truck’s weight, planned trail use and how much clearance is needed under the bumper. Keep a list of the bolts and washers used, since mixing hardware can cause loose or uneven fits over time.
- Decide on winch and D-ring mounts before installation
- Inspect recovery points after every hard pull
- Use matched hardware for each mount
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR13-K2961-1 |
| UPC | 5810109257 |
| Type | Black Steel replacement front bumper |
| Position | Front |
| Width | Full |
| Material | 14 gauge steel |
| Finish | Black powder coat |
| Fit type | Direct fit |
| Tow hooks | Included |
| Light mounts | Not included; accepts factory fog lights |
| Winch mount | Optional, not included (12,000 lb winches) |
Vehicle fitment
This bumper is made for the Ram 1500 from 2012 through 2018.
It is made for Ram 1500 trucks only, so Ram 2500 and 3500 pickups and older 1500s need a different bumper. Check your truck’s year, model and trim against this part before ordering.
Installation notes
Tow hooks come with the bumper. Winch, D-ring and receiver add-ons are all optional bolt-on pieces.
What’s included
- Black Steel replacement front bumper in black powder coat
- Tow hooks
Not included: The optional winch mount, D-ring mounts, 2-inch receiver and any winch.









