Overview
The Energy Suspension 9.8138R is a red polyurethane upper and lower bushing set for a rear shock absorber.
The set requires reusing all metal hardware during installation. It is a universal fit set, so it is not tied to a specific vehicle.
Key features
- Rear shock upper and lower bushing set
- Polyurethane construction
- Red color
- Universal fit
- Metal hardware must be reused
Rear shock bushing care
Rear shock bushings take the full force of each compression and rebound, so they wear faster than many owners expect. The upper and lower sets keep the shock centered between the body and the axle. When they harden, split or flatten, the shock can clatter or pull to one side under load.
Because the set reuses metal hardware, the bushings and the hardware should be checked together. Clean the sleeves and mounting holes before reassembly, and make sure the hardware is straight and free of corrosion. A worn sleeve inside a bushing can allow the shock to shift, so inspect that surface as well.
Check the bushings each time the rear suspension is serviced. Look for splits, bulging or uneven wear around the sleeve. Replacing the upper and lower pieces together keeps the rear shock moving evenly on both ends.
- Splits or bulging around the bushing
- Clatter from the rear when the shock cycles
- Corrosion on the reused hardware
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.8138R |
| UPC | 703639415893 |
| Material | Polyurethane |
| Color | Red |
| Fitment | Universal fit |
| Hardware | Reuse all metal hardware |
Vehicle fitment
Universal fit is the stated fitment for this rear set. No make, model, year or chassis code is given, so match the bushings to your rear shock before installation.
Confirm fit for your vehicle’s year, model and trim before ordering. Match the bushings to your rear shock’s eye size before installing.
Installation notes
The set must be installed with reused metal hardware, so keep the existing metal hardware for reinstallation.
What’s included
The set includes upper and lower bushings for the rear shock. Metal hardware is not part of the set; reuse the existing hardware.









