Overview
The Energy Suspension 2.5101G is a black polyurethane front sway bar bushing set for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7.
The set uses HYPER-FLEX polyurethane in place of rubber. Bushings and end links together affect how a sway bar controls body roll.
Key features
- Black polyurethane front sway bar bushing set
- HYPER-FLEX polyurethane
- Fits CJ5 Base, Golden Eagle, Laredo, Limited and Renegade trims.
- Fits CJ7 Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.
- Direct fit listed by the brand
Polyurethane on a CJ front end
CJ front sway bars rely on bushings to hold the bar steady in its brackets while the axle moves. Polyurethane bushings are firmer than rubber, so they hold position better under load but can feel stiffer on rough trails. Many owners on lifted or older CJs pair this change with a fresh set of end links.
Before installation, clean the bar and the inside of each bracket, and remove any old rubber that remains in the bore. Use a grease that is suitable for polyurethane, and avoid pinching the bushing when the bracket bolts are tightened. Check the bar for cracks or flat spots while it is off the vehicle.
If the bar is bent or the links are worn, replace those parts too, since a new bushing cannot correct a damaged bar.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.5101G |
| UPC | 703639261094 |
| Position | Front |
| Color | Black |
| Material | Polyurethane (HYPER-FLEX) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 and 1976–1986 Jeep CJ7 across the trims named here.
Other Jeep models, including the Wrangler YJ and Cherokee XJ, and CJ years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the exact pieces in the package against your installation before starting.
Not included: a replacement sway bar, since this product is a bushing set only.









