Overview
The Energy Suspension 4.5187R is a rear sway bar bushing set for a 30mm rear bar, fitting the 1999–2004 Ford F-250 Super Duty. It is a red polyurethane kit that replaces the factory rubber bushings and includes sway bar end link bushings.
Energy Suspension positions polyurethane as a firmer, longer-lasting alternative to the soft rubber that comes from the factory. The bushings are greaseable through zerk type fittings, and internal channels are meant to carry lubricant to the areas that need it. Owners who want a more controlled rear bar on a Super Duty can use this set as a direct swap for the original rubber.
Key features
- Rear sway bar bushing set for a 30mm bar
- Red polyurethane construction
- Sway bar end link bushings included
- Greaseable bushings with zerk type fittings
- Channels route lube to the moving surfaces
- Direct fit replacement for the rear bar mounts
Rear bar and end link wear
The rear sway bar on a Super Duty works with the rear suspension to limit body roll during turns and reduce sway when loaded. Worn bushings can allow the bar to rattle in its mounts, and loose end links can cause clunks over rough pavement. A firm, quiet rear bar depends on all of these parts being in good condition.
Because the end links are often exposed while the bushings are replaced, inspect them carefully. Look for play at the ball joints or bushings, torn boots and bent links. Replace worn end links alongside the bushings, and lubricate the rear bushings with a light grease to help them slide into place.
Trucks that carry heavy loads or tow often put more stress on the rear bar, so check the bushings and mounts more regularly. Keep the mounting bolts at their proper torque after installation, and recheck them after the first few drives.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 4.5187R |
| UPC | 703639060277 |
| Position | Rear |
| Bar diameter | 30mm |
| Color | Red |
| Material | Polyurethane |
| Lubrication | Greaseable, zerk type fittings |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2004 Ford F-250 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Other Ford models and F-250 years outside 1999–2004 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit includes end link bushings, inspect the end links while the rear bar is exposed. Support the truck securely on stands before working under the rear of the vehicle.
What’s included
The kit includes the rear sway bar bushings and the sway bar end link bushings.
Not included: the sway bar and the end links themselves.









