Overview
The ENE4.7102R is a red 4-piece polyurethane C-bushing kit for Ford Bronco, F-100 and F-150 trucks built between 1965 and 1979.
The kit is the red color option of the company’s C-bushing design. Energy Suspension says poly C-bushings improve handling, perform well under load and keep vehicle alignment in place.
Key features
- Four red polyurethane C-bushings
- Resistant to vehicle fluids and road grime
- Designed to improve handling
- Helps maintain proper vehicle alignment
Why poly bushings wear differently
C-bushings sit at pivot points in the front suspension, where small movements repeat thousands of times. Rubber softens with heat and oil, while polyurethane holds its shape better under the same loads, which is why many owners upgrade when a truck is restored. Expect a firmer feel than rubber, especially over rough pavement, and some extra squeak if the bushings run dry.
When replacing C-bushings, inspect the pivot shaft and mounting bores for wear, rust and galling. A bushing pressed into a damaged bore will not last. Check nearby hardware and any worn ball joints or control arm parts at the same time, since loose parts can make new bushings feel vague. Torque the fasteners to the factory specification once the truck is on its wheels.
- Clean the pivot shaft before pressing bushings
- Use a lubricant made for polyurethane parts
- Inspect bores for elongation or rust
- Replace worn ball joints at the same time
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | ENE4.7102R |
| Type | C-bushing kit |
| Quantity | 4 pieces |
| Color | Red |
| Material | Polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1966–1972 and 1974–1979 Ford Bronco, the 1965–1976 Ford F-100, and the 1977–1979 Ford F-150. Confirm your vehicle’s year, model and trim before ordering.
The list does not cover the 1973 Bronco or F-150 models outside 1977–1979. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four C-bushings in red polyurethane.








