Overview
The Energy Suspension 2.4105R is a red polyurethane body cab mount set for the 1987–1995 Jeep Wrangler YJ. It is intended to take the place of rubber body and cab mounts that have worn out or become distorted.
The material is HYPER-FLEX polyurethane, built for demanding off-road driving while still riding smoothly on pavement. The mounts also help keep the truck cab aligned with the bed.
Key features
- Red finish
- HYPER-FLEX polyurethane construction
- Built for worn or distorted rubber body mounts
- Requires reuse of all metal hardware
Setup tips for the swap
Before you swap mounts, look at how the cab sits on the frame and whether it moves when the body rocks. Note how the old mounts were positioned so the new set can be seated the same way. Rust on the frame brackets is common on older Wranglers in wet climates, so clean those surfaces before fitting the new pieces.
Keep a small kit of tools ready, including a socket set, a torque wrench and a penetrating lubricant for stubborn fasteners. Replacing the mounts on both sides at once keeps the body evenly supported. After the first few drives, recheck the fasteners and listen for new clunks, since a loose bolt is a common cause of trouble after a mount change.
- Clean frame brackets before installation
- Mark original mount positions
- Recheck fasteners after the first drive
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.4105R |
| UPC | 703639261025 |
| Color | Red |
| Material | Polyurethane (HYPER-FLEX) |
| Hardware | Reuse all metal hardware |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Models outside the YJ generation, including the TJ, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The set calls for the existing metal hardware to be reused, so keep those fasteners available during the change.
What’s included
Reuse of existing metal hardware is required, so keep those fasteners on hand during the change.









