Overview
The EBC UD1042 is an Ultimax OEM replacement brake pad from EBC Brakes, part number UD1042. It is a Direct Fit type, but no vehicle years, models or chassis codes are attached, so check the pad shape against your current pads before installing.
Key features
- OEM replacement brake pad
- Ultimax product line from EBC Brakes
- Direct Fit fitment type
- Part number UD1042 with UPC 840655087571
Pad compound and wear
Brake pad friction material wears gradually, and the rate depends on driving style, load and how often the brakes are used hard. Worn pads may squeal, cause longer stopping distances or leave a grinding noise once the backing plate contacts the rotor. Inspect pad thickness at every tire rotation and replace the pads before they reach the minimum thickness.
When replacing pads, check the rotor surface for scoring or heat marks and measure its thickness against the minimum stamped on the rotor. Clean the caliper bracket and slide surfaces, and apply a thin layer of high-temperature grease where the service procedure calls for it. New pads should be bedded in before towing or long descents. Replace pads in axle pairs so braking stays even from side to side.
Specifications
| Brand | EBC Brakes |
|---|---|
| Part number | UD1042 |
| UPC | 840655087571 |
| Product line | Ultimax |
| Part type | OEM replacement brake pads |
| Fitment type | Direct Fit |
Vehicle fitment
The UD1042 has no vehicle years, models or chassis codes attached, so confirm the direct fit against your vehicle’s year, model and trim before choosing these pads.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bed in new pads with a series of moderate stops before any hard braking. Brake work is safety-critical, so have the installation checked by a qualified technician.
What’s included
The package is brake pads. Check shims, hardware and wear sensors against your installation before starting.









