Overview
The EBC Brakes Yellowstuff DP41657R is a Street and Track brake pad set, an upgrade pad made for the stock caliper and intended for performance trucks and SUVs. No vehicle list is given for this part number.
EBC calls Yellowstuff the highest rated friction pad of any EBC brake pad. EBC says these pads do not need warm-up to work at their best, so they also suit everyday street driving, and that the high-friction compound is a good choice for towing.
The pad is a direct-fit upgrade over the stock pad and is made for the stock caliper.
Key features
- Yellowstuff Street and Track friction compound
- The compound is designed to work without warm-up.
- Suited to everyday street use as well as performance driving
- EBC recommends the compound for towing with a truck or SUV
- Upgrade pad for the stock caliper
- Direct-fit design
Bedding in and pad care
New brake pads need a bedding routine before they reach their full stopping power. Make a series of moderate stops from a steady speed to transfer an even layer of friction material to the rotor, then let the brakes cool fully. Skipping this step can leave uneven pad contact and noisy braking.
Pads used for towing or spirited driving run hotter, so check pad thickness and rotor condition at each service. Look for uneven wear, glazing or scoring on the rotor, and replace the rotor if it has grooves the pads cannot clear. Keep the front and rear compounds consistent to avoid a mismatch in braking balance.
- Bed in with moderate stops
- Check pad thickness at each service
- Inspect rotors for scoring or glazing
- Keep brake fluid fresh for heavy use
Specifications
| Brand | EBC Brakes |
|---|---|
| Part number | DP41657R |
| UPC | 840655025139 |
| Product type | Brake pad set |
| Pad line | Yellowstuff Street and Track |
| Caliper | Stock |
| Type | Upgrade |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model, axle and trim before ordering, since brake pads are specific to the caliper.
Confirm whether it fits the front or rear axle for your vehicle before ordering.
Installation notes
EBC recommends using the same compound on the front and rear axles, because each compound has its own stopping character and mixing them could compromise one or both sets. EBC also recommends professional installation for all brake pads.









