Overview
Part number 175513 is a Rigid Industries E2-Series LED Light Bar with universal fit and bracket mounting. Rigid positions the E-Series for off-road driving, and also for power sports, marine, general automotive and first responder work.
Updated LED technology provides up to 111% more raw lumens, and the E-Series PRO adds new branding and blacked-out circuit boards. Confirm the beam pattern you need before ordering this part number.
Key features
- Several beam choices across the E-Series line, including Spot, Flood, Driving, Hyperspot and Diffused
- Combination optics Driving/Spot and Spot/Hyperspot are part of the lineup
- It is designed for high brightness and efficiency.
- Refreshed circuit boards in a blacked-out finish on the E-Series PRO
- Clear lens and LED bulb type
- Bracket mount with a 0 to 10 inch size range
Choosing a mounting spot
Where a light bar is mounted affects both its coverage and how much it gets damaged on the trail. Brush guards, roof racks and bumper mounts each suit different loads and wind exposure. Bracket mounts make it easier to angle the light, and a stable mount keeps the beam aimed the same way after rough driving.
Wiring is the other half of a good install. Route the cable away from moving parts and sharp edges, and use grommets where it passes through metal. A fused relay near the battery protects the circuit, and a switch in the cab lets you control the light without touching the wiring. Recheck bracket bolts after the first few runs off road, since vibration can loosen them.
- Check clearance before drilling
- Use grommets where wiring passes through metal
- Recheck bracket bolts after rough trails
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 175513 |
| UPC | 849774029219 |
| Product line | E2-Series LED Light Bar |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Bracket |
| Size | 0 to 10 inches |
| Fitment | Universal fit |
| Quantity | Single |
| Raw lumen increase | Up to 111% more. |
Vehicle fitment
Universal fit means this light bar is not built for one year, make or model. Choose a mounting spot that suits the 0 to 10 inch size range and leaves room for the bracket and the wiring run.
Since it is not vehicle-specific, check clearance, aim and local rules on your own vehicle before installing.
Installation notes
Wire the light through a fused relay with a switch, not directly off the battery terminals. Confirm local road-use rules before using an auxiliary light on a public road.
What’s included
One E2-Series LED Light Bar with a bracket mount and a clear lens.
Not included: Check the package contents against your installation before starting, and plan for a fused relay, switch and wiring as needed.









