Overview
The Rigid Industries E-Series Driving Light, part number 106613, is a 6 in. square LED driving light with a black housing and white light output. It is rated 41w with 12 LEDs and comes as a 2 piece set. It is a universal fit light, not built for one year, make or model.
Choose a mounting bracket and location that suit your vehicle before installing.
Key features
- 12 LEDs
- Black square housing
- White light output
- 41w power rating
- 2 piece set
Driving light setup
Driving lights draw a lot of current compared with a dash lamp, so they generally run through a relay and a fuse rather than directly from a switch. Place the fuse close to the battery or power source and route the leads away from heat and sharp edges. Secure the bracket so the light cannot shift or vibrate loose on rough roads.
Aim the light after mounting, on a level surface, so the beam lights the road ahead without dazzling oncoming drivers. Check local road-use rules for auxiliary lights before choosing where to mount them, since rules vary by area. Inspect the mount, housing and wiring after the first few trips and retighten as needed.
- Use a relay and fuse
- Aim the beam on level ground
- Inspect the bracket after rough drives
- Check road-use rules where you drive
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 106613 |
| UPC | 849774021596 |
| Size | 6 in. |
| Power | 41w |
| LEDs | 12 |
| Housing | Black square |
| Light color | White |
| Quantity | 2 piece set |
Vehicle fitment
Universal fit, so it is not matched to a specific year, make, model or trim.
Confirm your vehicle’s year, model and trim before ordering, and plan the mounting for the vehicle you will use it on.
Installation notes
Driving lights of this type generally need fused relay wiring, and local road-use rules govern where auxiliary lights may be run.
What’s included
The light is supplied as a 2 piece set.
Not included: Plan for mounting hardware and wiring before installing.









