Overview
The Rigid Industries Dually Side Shooter LED driving light cube, part number 262313, is a compact wide-spread driving light built for A-pillar, fog light and motorcycle mounting. It is the D-SS PRO, Rigid’s Dually-Side Shooter Professional Race Output LED pod, and it is a universal fit light with a bracket for mounting.
The side-aimed LEDs are the defining feature. A main forward array carries the throw, and extra LEDs point out from the sides to build a much broader beam than a standard driving pod. The D-SS PRO offers up to 102% more raw lumens, depending on the optics chosen. It suits drivers who need a wide wash of light close to the vehicle more than those who need distant reach.
Key features
- Side-shooting LEDs add horizontal spread to the main beam
- Up to 120-degree horizontal lighting coverage when used in pairs or as a single light
- Main forward LEDs available with Spot, Flood or Driving optics
- Pairs carry three side-shooting LEDs on one side of each fixture
- Single lights carry a pair of side-shooting LEDs on both sides
- Compact square housing built around Rigid’s Professional Race Output LED design
Wiring and aiming a wide cube
Side-aimed LEDs change how the light is aimed. Because the pattern is wider, a small tilt spreads light sideways where it is not needed. Set the aim once the mount is tight, then check it again after the first few drives. Aim lower for close work and higher for distance, and keep the beam off oncoming traffic.
Driving lights draw meaningful current, so a fused relay is the sensible route. Keep the switch on control current and run the feed wire away from heat and moving parts. Clean the lens with mild soap and water, since road grime reduces output more than most people expect.
- Set the aim after the bracket is fully tightened
- Run the feed through a fuse and relay
- Clean the lens regularly to keep output steady
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 262313 |
| UPC | 849774027475 |
| Product type | Driving light cube (Dually Side Shooter) |
| Bulb type | LED |
| Light shape | Square |
| Mounting type | Bracket |
| Optics | Spot, Flood or Driving |
| Raw lumens | Up to 102% more, depending on optic |
| Horizontal coverage | Up to 120 degrees |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so it is not made for one make, model or year. Its use depends on where the bracket can be mounted: A-pillars, fog light positions and motorcycles. Each mount needs clearance for the housing and its beam.
Installation notes
Driving lights draw meaningful current, so wire the cube through a fuse and a relay rather than a dash circuit. Aim the beam after mounting, since the side LEDs widen the pattern and a tilted fixture spreads light where you do not need it. Check local rules on driving lights before using a forward-facing light on public roads.
What’s included
It is sold as a single driving light cube with a bracket mount. Check the package contents for a wiring harness, switch and extra mounting hardware before planning the install.









