Select your vehicle

Dorman Power Steering Pump Pulley – 300-302

Dorman

$21.59In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 5:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Outside diameter 5.313 inches
  • 16.84 bore, unit not given
  • High quality steel construction
  • Replacement for belt-driven steering pumps
  • Part number 300-302 (Dorman)

Description

Overview

The Dorman 300-302 is a steel power steering pump pulley for belt-driven steering pumps. It has an outside diameter of 5.313 inches and a 16.84 bore, and it works as part of the belt drive system.

It helps restore proper power steering function and should be replaced whenever the power steering pump is serviced.

Key features

  • Outside diameter 5.313 inches
  • 16.84 bore
  • High quality steel construction
  • Quality-tested by Dorman for trouble-free performance and durability
  • Straightforward installation.

Signs of a worn pulley

A steering pump pulley turns with the drive belt on every engine revolution, so it carries constant load. Over time the grooves wear, the bearing can loosen, and the pulley can start to wobble. Any of these changes affects how the belt tracks and how smoothly the pump runs.

When the pump is serviced, inspect the pulley while the belt is off. Spin it by hand, look for side play, and check the belt surface for glazing or uneven wear. A pulley that has been running alongside a worn belt often needs to be replaced at the same time.

  • Wobble or side play when turned by hand
  • Grooves worn into the belt surface
  • Squealing or chirping belt noise
  • Belt slipping under steering load

Specifications

Brand Dorman
Part number 300-302
UPC 19495060161
Outside diameter 5.313 inches
Bore 16.84 (unit not given)
Material Steel
Use Belt-driven steering pump drive

Vehicle fitment

Compare the outside diameter and bore to the pulley you are replacing, and check fit against your vehicle’s year, model and trim.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Replace this pulley whenever the power steering pump is serviced. Belt routing depends on your engine, so follow the procedure for your vehicle.

What’s included

The pulley is the item described. No bolts or other hardware are named.

SKU: DOR300-302 Category:

Specification

Shipping weight 1.70 lbs
Package dimensions 7.50 × 7.00 × 2.20 in
brands

Questions & Answers

What size is the Dorman 300-302 pulley?

The pulley is listed with an outside diameter of 5.313 inches and a bore of 16.84, with no unit given for the bore. It is a steel pulley for belt-driven steering pumps.

Is this pulley a direct replacement?

It is made to replace a steel pulley on a belt-driven steering pump. Compare the outside diameter and bore with the pulley you are removing, and confirm fit for your year, model and trim before buying.

When should the pulley be replaced?

Replace it whenever the power steering pump is serviced, since the pulley turns with the drive belt and wears alongside it. It is part of the belt-driven steering pump drive.

What signs show a steering pump pulley is worn?

Look for a wobbling pulley, a squealing belt, grooves worn into the pulley face, or a belt that slips when the steering is turned hard. Any of these means the pulley should be inspected and likely replaced, especially when the pump is being serviced.

Should the drive belt be replaced at the same time?

Often yes. A belt that has run on a worn pulley may be glazed or stretched, so inspect it when you replace the pulley and install a new belt if it shows wear. Check the belt routing against your engine before installing.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon