Overview
The Dorman 47057 is a crankcase vent tube, UPC 37495470575, made for 4.0L six-cylinder engines. It is a PCV elbow of oil-resistant nylon or rubber that seals PCV hoses and helps prevent vacuum leaks.
Fit is known only for the 4.0L six-cylinder engine and Direct Fit style. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Mounts on the back of the valve cover with an orifice
- Oil-resistant material
- Resilient construction that resists brittleness and cracking
- Presses into place
- Direct fit style
Before you install
A crankcase vent tube carries gases from the valve cover into the PCV system through a hose. The PCV system keeps pressure in the engine stable and routes oil vapor back to be burned, so a tube that cracks or loosens can cause rough idle, oil seepage at the valve cover or a vacuum leak. Because the tube sits at the valve cover, it is often inspected whenever the cover gasket is replaced.
Press-in tubes depend on a snug seat. Before fitting, clean any old residue from the valve cover opening and seat the tube squarely so it does not twist. Replace the PCV hoses at the same time if they feel hard, swollen or cracked, since a new tube on old hose can still leak. After the first few drives, listen for hissing near the valve cover and recheck the connection.
Specifications
| Brand | Dorman |
|---|---|
| Part number | 47057 |
| UPC | 37495470575 |
| Engine | 4.0L six-cylinder |
| Outside diameter | 0.988 inches |
| Inlet diameter | 0.728 inches |
| Material | Oil-resistant nylon or rubber |
| Fit | Direct Fit |
Vehicle fitment
Check the valve cover and PCV hose connections on your engine before installing the tube.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tube presses into place. Make sure the hose connections are secure before the engine runs.
















