Overview
The Crown Automotive Crankcase Vent Tube, part number 53030495, is a PCV vent tube for the 4.0L 6 cylinder engine. It mounts at the rear of the valve cover.
It is a direct fit tube. Match the engine and valve cover position to your vehicle before ordering.
Key features
- PCV vent tube for the 4.0L 6 cylinder engine
- Rear of valve cover mounting location
- Direct fit style
- Crown part number 53030495 with UPC 848399089332
Routing and sealing the vent
On a valve cover mounted vent, the tube carries crankcase vapor from the rear of the cover into the PCV hose. Because the mounting point is fixed, the angle of the hose matters: a tight bend or a hose that is too short can kink and restrict flow. Route the hose so it has a smooth path and does not rub against hot engine parts or moving components.
Seals at the valve cover deserve attention whenever the tube is changed. Wipe the cover surface clean and check the gasket for flattening or seepage. If the cover is off for another job, this is a good time to replace the vent grommet or hose clamp. After installation, idle the engine and watch the rear of the cover for any oil weeping.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53030495 |
| UPC | 848399089332 |
| Engine | 4.0L 6 cylinder |
| Mounting location | Rear of valve cover |
| Fitment type | Direct fit (per brand) |
Vehicle fitment
This tube is made for the 4.0L 6 cylinder engine only. Other engine sizes are outside its intended use.
Confirm your vehicle’s year, model and trim before purchase. Make sure your engine is a 4.0L 6 cylinder.
Installation notes
The tube mounts on the rear of the valve cover, so check that the position matches your valve cover before fitting.
What’s included
The package contains the vent tube itself. Check the package contents against your installation before starting.









