Select your vehicle
-13%

Dick Cepek DC-2, 17x9 with 5 on 5 Bolt Pattern – Gloss Black – 90000000499

Dick Cepek

Shop Dick Cepek Wheels 17x9 5x5 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 17 x 9 DC-2 aluminum spoke wheel in gloss black
  • 5 on 5 bolt pattern, 83 center bore, -12 offset, 4.5 backspacing
  • Machined finish with a UV-resistant clear coat
  • Part number D/C90000000499; universal fit.

Description

Overview

The Dick Cepek DC-2 is a 17 x 9 aluminum spoke wheel in gloss black, part number D/C90000000499. It has a 5 on 5 bolt pattern, an 83 center bore, a -12 offset and 4.5 backspacing. It is built for today’s Jeeps.

The wheel has a gloss black machined finish with a clear coat that provides UV protection. The clear coat supports durability and easy care in harsh climates.

Key features

  • Aluminum construction in a spoke style
  • Gloss black finish with a machined face
  • Clear coat with UV protection for durability and easy care
  • Part of the DC2 series

Wheel fit and offset basics

Offset and backspacing decide how far the wheel sits in the fender and how close the tire comes to suspension parts. A negative offset pushes the wheel outward, which can change clearance at the inner fender and steering components. Before mounting any wheel, compare the offset and backspacing with your current wheels so the new set does not rub or sit out of position.

Tire choice goes with the wheel. Match the tire’s width to the wheel’s rim width, and confirm the load rating for your vehicle. Use the correct lug seat style for the wheel, and torque the lugs in a star pattern after the first drive. Clean the wheel with mild soap and a soft brush, since road salt and mud can dull the clear coat over time.

  • Compare offset and backspacing with your current wheels
  • Match tire width to the wheel’s rim width
  • Use the correct lug seat style and torque in a star pattern
  • Clean with mild soap to protect the clear coat

Specifications

Brand Dick Cepek
Part number D/C90000000499
Series DC2
Style Spoke
Diameter 17 inches
Width 9 inches
Bolt pattern 5 on 5
Center bore 83
Offset -12
Backspacing 4.5
Construction Aluminum
Finish Gloss black, machined

Vehicle fitment

It is a universal fit wheel. The bolt pattern, center bore and offset determine which vehicles it mounts to, so check those measurements against your Jeep’s hub before ordering.

Measure the hub and compare it with the 5 on 5 bolt pattern and 83 center bore before buying.

Installation notes

The wheel must match your hub’s bolt pattern and center bore, and its -12 offset changes where the wheel sits in the fender. Confirm those measurements before mounting, because a mismatch can cause rubbing or improper seating.

What’s included

This item is the wheel only.

Not included: tires.

SKU: D/C90000000499 Categories: ,

Questions & Answers

What bolt pattern is the Dick Cepek DC-2?

It is a 5 on 5 bolt pattern, with an 83 center bore and a -12 offset. Check these measurements against your hub before you buy.

Is the DC-2 a universal fit wheel?

It is a universal fit wheel, so no year or model is tied to it. The bolt pattern, center bore and offset determine whether it mounts to your vehicle.

What finish does the DC-2 have?

It is gloss black with a machined finish. The clear coat carries UV protection, which Dick Cepek says gives durability and easy care in harsh climates.

Do I need hub-centric rings with this wheel?

Hub-centric rings are used when the wheel's center bore is larger than the vehicle's hub. They center the wheel on the hub so the lug nuts carry less of the load. Check the bore against your hub before deciding whether rings are needed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dick Cepek Wheels 17x9 5x5 on Amazon