Overview
The Daystar Polyurethane Motor Mount, part number KJ01003BK, is a black heavy-duty steel engine mount for an AMC V8 engine, sold as a pair. Daystar uses a special polyurethane blend to isolate the engine from the mount, which the brand says reduces the power loss a traditional mount allows.
The mount is fully welded and interlocked. Daystar says its polyurethane resists oil and grease better than rubber mounts, which can extend the service life of the mount.
Key features
- Special polyurethane blend isolates the engine from the mount
- Reduces the power loss of a traditional mount.
- Resists vehicle fluid, oil, grease and road grime
- Fully welded and interlocked heavy-duty steel construction
- Sold as a pair, black finish
Keeping mounts in service
Engine mounts work hardest during engine start, hard throttle changes and off-camber driving, when the engine shifts against the frame. Polyurethane isolators are firmer than rubber, so they transmit more vibration but hold the engine more precisely. Over time, heat, grease and road grime can break down any isolator, so periodic inspection is practical for a V8 that carries a lot of torque.
When mounts are replaced in pairs, the engine rests evenly and the new isolators wear at the same rate. Check that the mounts do not contact the frame or headers after installation, since contact can cause noise or cracks. Note any change in engine vibration after the swap, and recheck the bolts after the first few drives.
- Check both mounts after installation
- Look for shiny or cracked isolator surfaces
- Confirm clearance to headers and frame
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ01003BK |
| UPC | 814423011563 |
| Engine application | AMC V8 |
| Construction | Heavy-duty steel, fully welded and interlocked |
| Isolator material | Polyurethane blend |
| Finish | Black |
| Quantity | Sold as a pair |
| Fitment note | Universal Fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. An AMC V8 engine application and Universal Fit label do not confirm the mounting points on your chassis, so check both before installing the pair.
Confirm your vehicle’s year, model and trim before ordering. An engine application alone does not confirm the mounting points on your chassis.
Installation notes
Support the engine safely before removing any mount, because the engine’s weight rests on the mounts during the swap. Mounts are sold as a pair, so plan to replace both.
What’s included
The mounts are sold as a pair. Look over the included parts against your install plan first.
















