Overview
The Crown Automotive front left motor mount, part number 52018281, is built for the 1993–1998 Jeep Grand Cherokee (ZJ) with a 4.0L engine. It is the driver side counterpart to the passenger side 52018280 mount. Motor mounts, also called engine mounts, support the engine on the frame, and this one uses a black rubber bushing.
Choose this driver side mount when the original front left unit on your ZJ needs replacing. Match the position and engine size before ordering.
Key features
- Front left (driver side) position
- Black rubber bushing
- Direct fit designation on the manufacturer list
- Designed for 4.0L engine applications
Driver side installation tips
The driver side mount takes the same engine loads as its passenger counterpart, but it sits in a different position relative to the exhaust manifold and steering components. Clearance around the mount can be tight, so plan for access before removing bolts. Take a photo of the original orientation first so the new one goes in the same way. Make sure the new mount sits flush against its bracket.
Support the engine on a jack or stand as the old mount comes out, and never let the engine rest on a single mount during the swap. Torque fasteners to the vehicle’s specification. Check that the bushing is not twisted or pinched once tightened, since that can shorten its life.
- Support the engine before removing bolts
- Clean the bracket surfaces
- Check bushing alignment after tightening
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52018281 |
| UPC | 848399014280 |
| Position | Front left (driver side) |
| Engine | 4.0L |
| Bushing material | Rubber |
| Bushing color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1993–1998 Jeep Grand Cherokee (ZJ) in Base, Laredo, Limited, Orvis, SE and TSi trims.
Model years 1999–2004 of the Grand Cherokee (WJ) and the Cherokee (XJ) do not appear on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The driver side and passenger side mounts are separate part numbers, with 52018280 used on the passenger side. Match the side and part number to the mount you remove.
What’s included
Confirm whether mounting bolts are needed for your installation before starting.









