Overview
The Daystar ComfortRide KC09103BK is a 1.5-inch front coil spring spacer kit sold as a pair. It uses polyurethane spacers at the front coil springs and is made for a 31-inch tire.
The ComfortRide design raises the front while keeping most of the stock components. It improves ground clearance and allows larger tires, and it is a direct-fit, front-only part.
Key features
- 1.5-inch front lift
- Coil spring spacers in polyurethane
- Sold as a pair
- Black finish
- Keeps most stock components
How coil spring spacers work
A coil spring spacer adds height between the spring seat and the coil, raising the front of the truck without replacing the spring itself. Because the spring rate stays the same, the ride often feels close to stock, though the shocks and bump stops now work from a higher starting point. Shock length and bump stop travel are worth checking before you drive it on the road.
A front-only lift changes the relationship between the front and rear, so the truck may sit uneven if the rear is left stock. Look at the brake hoses and CV angles once the front is raised, and inspect the front ball joints and tie rod ends while the spring is out. Polyurethane spacers resist rust better than steel ones, but they should still be inspected for cracking and compression over time.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KC09103BK |
| UPC | 814423010085 |
| Lift height | 1.5 inches |
| Lift location | Front only |
| Front lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish color | Black |
| Quantity | Pair |
| Tire size | 31 inches |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A wheel alignment is needed once the spacers are in place.









