Overview
The Curt Manufacturing CRT13194 is a Class III rear receiver hitch with a 2-inch by 2-inch receiver, made for the 2015–2019 Lincoln MKC. Curt designs this round tubular hitch for mid-capacity towing, where trailers weigh more than 4,000 pounds gross trailer weight (GTW) and less than 10,000 pounds GTW.
It is a round tubular hitch for mid-capacity towing, with a gloss black powder coat finish in the Class III/IV weight class. It mounts without drilling, and a roll pan cannot be used with it.
Key features
- Round tubular Class III design for mid-capacity towing
- 2 Inches X 2 Inches receiver opening
- No drilling required
- Trailers above 4,000 pounds GTW and below 10,000 pounds GTW
- Gloss black powder coat finish
- Does not fit with a roll pan
Towing with a luxury crossover
Luxury crossovers often have stability and trailer-sway features that work alongside the hitch. Keep the trailer loaded so tongue weight sits in the recommended range, and use a sway control device if the trailer feels unsettled at speed. The hitch does not change the vehicle’s rated capacity, so the lower rating always governs.
Look over the mounting points and receiver after each season, paying attention to welds and any corrosion near the frame. Touch up damaged finish promptly, since bare metal rusts quickly. Keep an eye on the trailer light harness and connector, because a damaged harness can cause lighting faults.
- Check the trailer brake controller settings before a trip
- Use a hitch cover to keep grit out of the receiver
- Re-check the hitch pin after rough roads
- Test trailer lights before each departure
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13194 |
| Mounting position | Rear |
| Fit type | Direct fit |
| Receiver size | 2 inches x 2 inches |
| Hitch class | Class III |
| Weight class | Class III/IV |
| Trailer weight range (GTW) | More than 4,000 pounds and less than 10,000 pounds |
| Finish | Gloss black powder coat |
| Roll pan compatibility | Does not fit with roll pan |
| Installation | No drilling is needed to mount the hitch. |
Vehicle fitment
It fits the 2015–2019 Lincoln MKC in the Base, Black Label, Premiere, Reserve and Select trims.
Other Lincoln models and MKC model years outside 2015–2019 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the design is no-drill, the hitch mounts without drilling into the vehicle body. Check for a roll pan before installing, since this hitch does not fit with one. Confirm that your vehicle’s towing rating covers the Class III loads the hitch is designed for.
What’s included
Check the package contents against your installation before starting.
Not included: Confirm which hardware your installation requires before ordering.









