Select your vehicle

Crown Disc Brake Caliper Bolt – 6507152AA

Crown Automotive

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits Jeep Wrangler, Liberty, Grand Cherokee, Commander, Compass and Patriot, plus Chrysler Pacifica and Ram 1500
  • M14 x 2 x 45 flanged bolt
  • Used on the caliper mounting bracket

Description

Overview

The Crown Automotive 6507152AA is a disc brake caliper bolt, an M14 x 2 x 45 flanged bolt that holds the caliper to its mounting bracket. It fits a range of Chrysler, Dodge, Jeep and Ram models from 2004 to 2013.

It fits the Jeep Wrangler, Liberty, Grand Cherokee, Commander, Compass and Patriot, as well as the Chrysler Pacifica and the Ram 1500.

Key features

  • Disc brake caliper bolt
  • M14 x 2 x 45 flanged bolt
  • Used on the caliper mounting bracket
  • Fits Chrysler, Jeep and Ram vehicles
  • Direct-fit design

Before you install the bolt

A caliper bolt carries the clamping load between the caliper and its bracket, so it has to seat fully and hold its torque. Threads that are stretched, rusted or damaged can loosen under braking vibration. When replacing the bolt, inspect the bracket threads for corrosion and clean the mating surfaces so the new flange sits flat against the bracket.

Bolts of this type are often replaced in pairs during a brake service, because the other bolt has seen the same load and heat. Use a torque wrench set to the value in your service manual, and never reuse a bolt that shows stretching or a rounded head. Recheck the bolts after the first few drives to confirm nothing has backed off.

Specifications

Brand Crown Automotive
Part number 6507152AA
Part type Disc brake caliper bolt
Size M14 x 2 x 45
Style Flanged bolt
Use Mounting bracket
Fit type Direct fit

Vehicle fitment

It fits the 2004–2008 Chrysler Pacifica, the 2006–2010 Jeep Commander, the 2007–2010 Jeep Compass, the 2005–2010 Jeep Grand Cherokee, the 2005–2010 Jeep Liberty, the 2007–2010 Jeep Patriot, the 2005–2010 Jeep Wrangler and the 2012–2013 Ram 1500.

It is for the caliper mounting bracket only. Years outside those ranges are not covered. Check your vehicle’s year, model and trim before buying the bolt.

Fitment

VehicleYearsTrims
Chrysler Pacifica2004–2008Base, LX, Limited, Touring
Jeep Commander (XK)2006–201065th Anniversary Edition, Base, Limited, Overland, Sport
Jeep Compass2007–2010Limited, Sport
Jeep Grand Cherokee (WK)2005–201065th Anniversary Edition, Laredo, Limited, Overland, SRT8
Jeep Liberty (KJ)2005–200765th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport
Jeep Liberty (KK)2008–2010Limited, Renegade, Sport
Jeep Patriot2007–2010Limited, Sport
Jeep Wrangler (JK)2007–2010Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited X (4-Door), X (2-Door)
Jeep Wrangler (LJ)2005–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)2005–200665th Anniversary Edition, Rubicon, SE, Sport, X
Ram 15002012–2013Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, R/T, SLT, ST, Sport, Tradesman, Tradesman HD

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What size is the Crown 6507152AA caliper bolt?

The bolt is an M14 x 2 x 45 flanged bolt, used to hold the disc brake caliper to its mounting bracket.

Which vehicles use the Crown 6507152AA bolt?

The bolt fits the Jeep Wrangler, Liberty, Grand Cherokee, Commander, Compass and Patriot, the Chrysler Pacifica and the 2012–2013 Ram 1500, within the years given above.

Where does the 6507152AA bolt go?

It is a disc brake caliper bolt for the mounting bracket, with a flanged head, not a caliper slide pin or bleeder screw.

How can I tell the caliper bolt needs replacing?

Look for rust or thread damage at the bolt head and bracket, a loose caliper, or a bolt that turns without tightening. Any of these signs means the bolt should be replaced before the brakes are used again.

Should the caliper bolt be replaced when pads are changed?

Not always, but it is a sensible check during that work. Inspecting the bolts takes little time, and replacing a corroded or stretched bolt avoids a loose caliper later. Torque the new bolt to the service manual value.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon