Select your vehicle

Crown Automotive Vacuum Harness – 53004838

Crown Automotive

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Crown Automotive vacuum harness, part number 53004838
  • Noted for the 4.0L 6 cylinder engine
  • UPC 848399017526
  • No vehicle fitment is posted; confirm before ordering

Description

Overview

The Crown Automotive vacuum harness, part number 53004838, is a replacement vacuum harness for the 4.0L 6 cylinder engine. It is a direct-fit replacement part.

A vacuum harness carries the vacuum connections that control a vacuum-operated component, so the connectors and routing need to match the engine and transfer case setup. Confirm the length, connector count and routing against your existing harness before installing.

Key features

  • Replacement vacuum harness for the 4.0L 6 cylinder engine
  • Direct-fit description from the manufacturer
  • Crown Automotive part number 53004838
  • Intended for transfer case vacuum switch applications

Vacuum system basics

A vacuum harness is a bundle of hoses and connectors that routes engine vacuum to a switch or actuator. When a line cracks, splits or loses its fittings, the controlled component may stop responding, and the symptom can look like a faulty switch or actuator. Tracing the whole path is often more productive than replacing one part at a time.

Before fitting a new harness, label the existing connections and take a photo of the routing. Vacuum lines can be brittle with age, so handle them gently and avoid stretching them over sharp edges. Once installed, check that each connection is seated and that no line is pinched against a moving part or exhaust component.

  • Label each connection before removing the old harness
  • Inspect hoses for cracks, stiffness or soft spots
  • Route lines away from heat sources and moving parts
  • Check for leaks after the engine is started

Specifications

Brand Crown Automotive
Part number 53004838
UPC 848399017526
Engine 4.0L 6 cylinder
Fit type Direct fit
Category Transfer case vacuum switch

Vehicle fitment

Confirm fit for your engine and transfer case before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the contents against your installation before starting.

SKU: CRO53004838 Category:

Specification

Shipping weight 12.00 lbs
Package dimensions 12.00 × 10.00 × 3.00 in
brands

Questions & Answers

What is Crown Automotive part 53004838?

It is a Crown Automotive vacuum harness, part number 53004838, for the 4.0L 6 cylinder engine. Crown Automotive sells it as a direct-fit replacement part for Jeep vehicles.

Does the Crown 53004838 harness fit my Jeep?

Confirm fit for your year, model and trim before ordering. Compare the harness connectors and routing with the harness being replaced.

What engine is the 53004838 harness for?

It is for the 4.0L 6 cylinder engine. Compare connectors, length and routing with your existing harness before fitting it.

How can you tell if a vacuum harness is leaking?

A leaking harness may cause a hissing sound near the engine, a rough idle or a vacuum-operated component that does not respond. Inspect each line and fitting for cracks, loose connections or soft spots, and check the routing for pinching.

Should other vacuum lines be inspected when the harness is replaced?

Yes, it is a good time to check nearby hoses and fittings. Old vacuum lines often age at the same rate, so replacing any that are brittle or cracked can prevent a repeat problem.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon