Overview
The Crown Automotive 5085461AB is a suspension strut bearing that sits in the strut mount. Crown Automotive has made replacement parts for Jeep vehicles for over 50 years. Match the part to your Jeep’s year, model and trim before buying.
Key features
- Replacement suspension strut bearing
- Part number 5085461AB
- Crown Automotive says its catalog includes many factory-discontinued items
- Labeled Universal Fit
Replacing the strut bearing
The strut bearing sits between the spring seat and the strut mount, and it lets the strut turn as you steer. When it wears out, the steering can feel notchy, and a knock or clunk often shows up when turning at low speed. Because the strut spring is under heavy compression, removal and reinstallation should be done with proper spring compressors and a stable work area.
Replacing the bearing is a good time to look over the strut mount, dust boot, bump stop and spring seat. Worn mount rubber can let the strut shift and wear the bearing faster, so inspect those parts together. Torque the top nut to the specification in your service manual after the strut is back in place, and check alignment if the front end feels off.
- Listen for clunks when turning at low speed
- Check the mount and bump stop at the same time
- Inspect the front tires for uneven wear
- Torque the strut nut after reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5085461AB |
| UPC | 848399034943 |
| Part type | Suspension strut bearing |
Vehicle fitment
Strut bearings are sized to particular strut mounts. The Universal Fit label does not identify a specific vehicle, so match the bearing to your existing mount before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strut assemblies are under spring tension, so use proper spring compression tools and safety practices when replacing the bearing.
What’s included
Confirm the hardware and quantities in the package against your strut assembly before starting.









