Overview
The Crown Automotive 6035709 is a speedometer gear O-ring for the 1993 to 1998 Jeep ZJ Grand Cherokee. It is a seal, not a gear, and it is the O-ring Crown names for its NP231 speedometer gears.
It is limited to the ZJ generation of Grand Cherokee.
Key features
- Speedometer gear O-ring that works as a seal for the speedometer drive
- Fits 1993 to 1998 ZJ Grand Cherokee models.
- Named as the O-ring for NP231 speedometer gears
- It is a direct fit for the listed application.
Replacing the speedometer seal
An O-ring in the speedometer drive area keeps lubricant from leaking past the gear housing and keeps dirt out of the gear. Because it is squeezed when the gear is seated, it takes a set after removal and may not seal as well when reused. Replacement is usually simple, but the old ring has to come out without scratching the housing bore, which is where many seal problems start.
Use a plastic or wooden pick to lift the old ring, and wipe the groove clean before fitting the new one. Lightly coat the new seal with clean lubricant so it slides into place without twisting. A leak around the speedometer drive usually shows as fluid or grime on the housing, and it is worth fixing before the fluid level drops.
- Use a non-metal pick to remove the old ring
- Clean the groove before fitting
- Lightly lubricate the new seal
- Check for leaks after a short test drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 6035709 |
| UPC | 70000689449 |
| Item type | Speedometer gear O-ring |
| Vehicle years | 1993 to 1998 |
Vehicle fitment
It fits the 1993 to 1998 Jeep ZJ Grand Cherokee.
Other Grand Cherokee generations, such as the WJ, are a different design and are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The O-ring is the item described.
Not included: the speedometer drive gear.









