Overview
Part 18760.17 from Rugged Ridge is a 34 tooth short shaft speedometer gear. It is a direct OE replacement for electrically driven speedometers on 93-06 Wrangler, 93-01 Cherokee and 93-98 Grand Cherokee models.
Before ordering, compare the 34 tooth count and short shaft length against the gear you are replacing.
Key features
- 34 tooth count
- Short shaft design
- Electrically driven speedometer use
- Direct OE replacement
- Bolt-on installation
Choosing a speedometer gear
An electric speedometer uses a sensor to read the drive gear, so the gear’s tooth count and shaft length must line up with the housing it rides in. Matching the original count keeps the reading accurate, while a different count shifts the reading up or down at every speed. Shaft length matters for the gear to seat and engage the sensor properly.
Vehicles fitted with electric speedometers often have sensors and wiring that age along with the gear. A sensor that reads intermittently can look like a gear problem, so test the wiring and connector before replacing good parts. Dirt and grit in the housing can also cause erratic readings.
When fitting the new gear, clean the housing, apply a light coat of grease to the gear teeth and seat the gear fully. Road test the vehicle at several steady speeds and compare the reading with a known reference after the first drive.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18760.17 |
| UPC | 804314254582 |
| Gear type | Speedometer drive gear, short shaft |
| Tooth count | 34 tooth |
| Speedometer type | Electrically driven |
Vehicle fitment
It fits 93-06 Wrangler, 93-01 Cherokee and 93-98 Grand Cherokee models with electrically driven speedometers. Use it only where those models and electric speedometers apply.
Cable-speedometer vehicles and model years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one 34 tooth short shaft gear. Verify what arrives in the box against your install plan.












