Overview
The Crown Automotive 5252043 is a shift cover gasket for the AX15 transmission and a 4.0L 6 cylinder engine. The UPC is 848399010183, and 5252043 is the number to match against your transmission’s shift cover.
Crown Automotive describes its replacement parts as direct fit, and this gasket is named for the AX15 transmission and 4.0L 6 cylinder engine. No Jeep years, models or trims are listed, so the vehicle should be confirmed before installation.
Key features
- Shift cover gasket for the AX15 transmission
- Listed with a 4.0L 6 cylinder engine
- UPC 848399010183
- It is a direct fit for the AX15 transmission.
Before you install
A shift cover gasket seals the joint between the shift cover and the transmission case, keeping gear oil inside and dirt out. On a transmission that has been opened, the old gasket is often compressed or torn, and reusing it is a common cause of seeping fluid around the top of the case. Because the gasket is thin, small misalignments show up as leaks after a few drives rather than during installation.
Clean both mating surfaces until they are bare metal, removing any old sealant or gasket fragments without scratching the aluminum. Inspect the shift cover for warped sealing faces, and check the shift forks and rails while the cover is off. Tighten the cover bolts in a crisscross pattern so the gasket compresses evenly. Recheck the fluid level once the vehicle has been driven and cooled.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5252043 |
| UPC | 848399010183 |
| Transmission | AX15 |
| Engine | 4.0L 6 cylinder |
| Category | Manual Trans Top Gasket |
Vehicle fitment
No vehicle years, models or trims are listed. The AX15 transmission and 4.0L 6 cylinder engine are the only applications named.
Check that your transmission is an AX15 before using the gasket. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents, whether one gasket or a set, against your installation before starting.












