Overview
The Crown Automotive replacement carburetor 83320007 is built for 4.2L engines and uses an electric stepper motor. It fits CJ5, CJ7, Scrambler and Wrangler (YJ) models from 1982 to 1990.
The carburetor replaces a 2-904 remanufactured unit and carburetors with the tag numbers BBD 8338, 8339, 8340, 8341, 8357, 8360, 8362, 8364, 8367, 8383, 8384 and 8394. It is not CARB approved, and vehicles using it may not pass California smog testing.
Key features
- Built for 4.2L engines.
- Electric stepper motor
- Replaces a 2-904 remanufactured carburetor
- Not CARB approved, with a California smog testing warning
Choosing a carburetor for your rebuild
A carburetor controls how much fuel and air reach the engine, so its condition directly affects starting, idle and throttle response. Signs that an old unit needs replacing include hard starting when cold, a rich or flooding smell, fuel seeping around the float bowl, and a throttle that sticks or returns slowly. Before swapping, check the air filter, ignition timing and vacuum lines, since these often cause the same symptoms.
The electric stepper motor on this unit adjusts idle airflow, so keep its connector clean and dry and check that the wiring is intact before installing. Many carburetor swaps also need new gaskets, fuel line fittings and linkage bushings, so have those on hand to avoid stalling the job partway through.
Once installed, set the idle with the engine warm, check for fuel leaks at every joint, and recheck the setup after the first few drives. Keep the fuel filter fresh, since debris can clog small passages and cause the same problems that prompted the change.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO83320007 |
| UPC | 848399085068 |
| Engine | 4.2L |
| Motor | Electric stepper motor |
| Replaces | 2-904 remanufactured unit |
| Replaces carburetor tags | BBD 8338, 8339, 8340, 8341, 8357, 8360, 8362, 8364, 8367, 8383, 8384, 8394 |
| CFM rating | Stock |
| Number of barrels | Stock |
| Secondary type | N/A |
| Choke style | OEM |
| CARB status | Not CARB approved |
Vehicle fitment
Fits the following vehicles:
- 1982-1983 Jeep CJ5: Base, Laredo, Limited and Renegade
- 1982-1986 Jeep CJ7: Base, Laredo, Limited and Renegade
- 1982-1985 Jeep Scrambler: Base, Laredo, Renegade, SL and SR
- 1987-1990 Jeep Wrangler (YJ): Base, Islander, Laredo, S, Sahara and Sport
Jeep J10, Cherokee and TJ Wrangler models are not on this list, and years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stepper motor is electrical and no wiring details are given, so compare the connector with your vehicle before installing.
What’s included
Check whether gaskets, linkage or wiring parts are needed for your installation before you begin.









