Overview
The Crown Automotive rear bumper guard, part number CRO52000469, is a black replacement guard for the driver side rear of the 1984–1996 Jeep Cherokee (XJ). It is a direct fit for that generation, with several XJ trims from Base through Sport.
A driver side rear guard is the part to choose when the rear left corner is worn or missing. It is the rear left position, which is the driver side of the vehicle.
Key features
- Black finish
- Rear left (driver side) position
- Direct fit for the 1984–1996 Jeep Cherokee (XJ)
- Replacement body part from Crown Automotive
Matching the original guard
A driver side rear guard usually takes more road spray and salt than the passenger side, so the mounting points and the rear left body corner are worth a close look. Before buying a replacement, check whether the old guard was bent, cracked or pulled away from its fixings, since that shows whether the body or the guard itself needs work.
Fit the new guard loosely first, then tighten it evenly so the gap to the rear body stays consistent. If the mounting holes have worn, a repair plate or new fasteners may be needed. Touch-up paint on the body can help blend the finish once the guard is in place.
- Look for cracks along the mounting edges
- Check the rear left body corner for rust
- Fit loosely before final tightening
- Replace worn fasteners rather than forcing them
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52000469 |
| Color | Black |
| Position | Rear left (driver side) |
Vehicle fitment
It fits the 1984–1996 Jeep Cherokee (XJ) in Base, Chief, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Later Cherokee generations such as the KL and Jeep Liberty models are not covered. Check your vehicle’s year and trim against this fit before buying.
What’s included
It is a single black driver side rear bumper guard. Mounting hardware needs to be checked against your installation before starting.
