Overview
The Centerforce 53006 is a clutch alignment tool with a GM 1 inch x 14 spline fitting, used to center the clutch disc during installation. Centerforce makes it as a standard alignment tool in black plastic.
Centerforce says one alignment tool can be used for many different installations on the same application, so it does not need replacing with each clutch. The listed fitment covers Chevrolet, GMC and Jeep models from 1983 to 2002.
Key features
- Standard alignment tool in black plastic
- GM 1 inch x 14 spline fitting
- Reusable across installations on the same application
- Nose diameter of 0.590 inches
Using an alignment tool
A clutch disc has to sit centered on the transmission input shaft splines for the gearbox to slide in. The alignment tool holds the disc in position while the pressure plate bolts are tightened, so the disc does not shift off center. Without it, the disc can be hard to line up at installation, which makes the transmission difficult to seat and can leave the disc unevenly loaded.
Plastic tools are inexpensive and easy to use, but the splines and nose can wear or crack with repeated use. Inspect the tool before each job and confirm the nose still fits snugly in the pilot bearing or bushing. Tighten the pressure plate bolts evenly in a crisscross pattern while the tool is in place.
- Check the tool for cracks before use
- Clean the spline surfaces and nose
- Store it in a dry place between jobs
Specifications
| Brand | Centerforce |
|---|---|
| Part number | 53006 |
| Spline count | 14 splines |
| Spline standard | GM 1 inch x 14 spline |
| Nose diameter | 0.590 inches |
| Material | Black plastic |
Vehicle fitment
It fits 1985–1989 Chevrolet Astro, 1983–1993 Chevrolet S10, 1983–1989 Chevrolet S10 Blazer, 1983–1990 GMC S15, 1983–1989 GMC S15 Jimmy, 1985–1989 GMC Safari, 1991–1993 GMC Sonoma, 1984–2000 Jeep Cherokee (XJ), 1986 Jeep CJ7, 1986–1992 Jeep Comanche, 1984–1987 Jeep Wagoneer (SJ), 1997–2002 Jeep Wrangler (TJ) and 1987–1995 Jeep Wrangler (YJ).
Wrangler TJ models from 2003 onward and LJ or JK Wrangler models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 1 inch x 14 spline and 0.590 inch nose diameter match the clutch application before using the tool.
What’s included
The item is the clutch alignment tool listed under part number 53006.









